Programmer Setting
102
M400-020A-K6
Buffer Setting of PC
You also can change the Buffer memory
of PC( Default driver is C: or D: )
If the space of C: or D: is not enough for IC, you can use removable device as buffer
memory.
（
Recommend to use C: or D:
as buffer memory.
）
※
Notice
①
Do not remove the removable device before changing to C: or D:, otherwise the
data maybe be damaged.
②
If you will use removable device, you must sure this device has been detected.
Slave Mode
Transfer data to programmer Buffer
（
SD
）
directly (ignore Buffer Memory).
Example)
Normally we transfer data through PC Buffer to programmer buffer (SD) for large
density IC. If you choose Slave Mode, the data will be transfered to Programmer
buffer (SD) directly.
（
Save time
）
(Recommend to use normal mode)
※
Notice
The Buffer Editor can not be viewed or edited.
The Copy function of Buffer editor can not be used.
Making sure you understand slave mode before using this mode.
