Mimosa Backhaul B24, Руководство пользователя

Страница: 17 / 80

Mimosa Backhaul and B24 Help Content
Mimosa Backhaul
Dashboard
Copyright © 2018 Mimosa Page Page 14
Reading the Signal Meter
Connected Link
Received signal strength is shown in large text in the center of the control, and as a green indicator in the top dial.
The blue shaded bar and text immediately below the dial represent target signal strength based on distance and
other information exchanged between radios. The objective is to align the green indicator with the blue bar as a
guideline during antenna aiming.
The resulting half-duplex PHY rates shown at the bottom of the Signal Meter control are correlated with the MCS,
and represent raw data across the link without protocol overhead. The Max Throughput values include TDMA
window size and MAC layer efficiency.
The following settings and values that affect link health are listed for reference:
B5/B5c
Channel 1 Center Frequency - True center of the first frequency range (no offset).
●
Channel 2 Center Frequency - True center of the second frequency range (no offset).
●
Channel Width - Number of channels used (1 or 2), and the width of each channel (20, 40 or 80 MHz).
●
Tx Power - Total transmit power level (dBm).
●
Link Length - Distance between local and remote radios (when connected).
●
B5-Lite/C5c PTP
Center Frequency - True center of the frequency range (no offset).
●
Channel Width - The width of the channel (20, 40 or 80 MHz).
●
Tx Power - Total transmit power level (dBm).
●
Link Length - Distance between local and remote radios (when connected).
●
B11
Center Frequency 1 - True center of the first frequency range (no offset).
●
Center Frequency 2 - True center of the second frequency range (no offset).
●
Channel Width - Number of channels used (1 or 2), and the width of each channel (20, 40 or 80 MHz).
●
Tx Power - Total transmit power level (dBm).
●
Link Length - Distance between local and remote radios (when connected).
●
B24
Center Frequency 1 - True center of the first frequency range (no offset).
●
Center Frequency 2 - True center of the second frequency range (no offset).
●
Channel Width - Number of channels used (1 or 2), and the width of each channel (20, 40 or 80 MHz).
●
Tx Power - Total transmit power level (dBm).
●
Link Length - Distance between local and remote radios (when connected).
●
Click the Spectrum Analyzer button to access the Spectrum Analyzer, which can also be found on the Channel &
Power page. This will not disturb the link.