PAGE 8 OF 22
▣
Installing DisplayLink USB Monitor Driver
This section shows you how to install the DisplayLink USB Graphics software and Touchscreen driver for MIMO
device on different operating systems.
[ Windows 7 to 10 operating systems ]
DisplayLink software can be installed from Windows update
.
Alternatively, the software can be
downloaded and installed from the DispalyLink website or from a CD-ROM, following the steps below.
1. Insert the CD into the CD-ROM drive
Important: Do not connect a MIMO device/screen to your PC before the install.
Double click on “Mimo3G.exe” in the CD-ROM we’re offering to run the install program, then the installing
program appears and move your cursor on the USB monitor Driver and click it.
2. Starting to install the USB Monitor Driver
The DisplayLink Core software installs.
3. The System Compatibility Check then runs 4. Click Install
(if the System Compatibility Check
passes)
