4
MAPS
•
Use the MAPS* (Mimaki Advanced Pass System) function to disperse the
pass boundary to make the feeding stripes less visible
•
MAPS4 can be switched to “AUTO” or “MANUAL” from printer’s
operation panel:
•
Press the “MENU” key in local mode
•
With arrow keys select “SETTING”, then press ENTER
•
Select “MAPS4”
•
Select “AUTO” or “MANUAL”
AUTO
Uses the optimal gradation pattern depending on the print condition (Ink type, resolution, profile, etc..)
By default, print with “AUTO” setting should be always used.
MANUAL
When there is a problem with the image quality with “AUTO” setting, adjust the gradation level of MAPS by
changing the “smoothing level” in “MANUAL” setting.
* When printing clear ink, MAPS4 does not work in 600x600dpi 8pass and 600x900dpi 12pass modes.
