MIMAKI TX300P-1800 Скачать руководство пользователя страница 2

2

2. Safety Precautions

]

3. Installation environment

• Use this printer as much as possible in a dust-free environment. Fans and air-blowers could cause the 

dustspewing.

• The using environment of this printer is from 20 to 30°C (68°F to 86°F) in temperature and from 35 to 65 % 

in relative humidity. Avoid the use of this printer at a temperature and humidity higher or lower than the 
indicated ranges.

When cleaning, be sure to provide adequate ventilation and be sure to wear the supplied protective 
glasses and gloves.

If ink should come into your eyes, immediately rinse with plenty of clean water for more than 15 min-
utes and rinse thoroughly to the back of the eyelids. Also, please consult a doctor as soon as possible. 
If ink adheres to the skin, please rinse thoroughly with a large amount of water and soap or skin deter-
gent.

When ink is mixed with water or alcohol, aggregates are generated. Do not to allow water or alcohol to 
deposit to the nozzle surface, around the head, cap, and wiper.

To ensure ink ejection stability, this machine must periodically eject (flush) a small amount of ink 
depending on the ink type when it is not used (output) for a long time.
When not using this machine for an extended period of time, execute the [CUSTODY WASH] function, 
("When the Machine Is Not Used for a Long Time (CUSTODY WASH)" Chapter 4 of Operation Man-
ual) and turn off only the power button on the front panel. The main power switch on the right side 
should be on (in the state of |) and the outlet should be inserted.

Never disassemble the machine. Failure to do so may cause electric shock, fire or damage.

Make sure that no moisture enters the machine. If the inside gets wet, it may cause electric shock, fire 
and damage.

Before cleaning, turn off the power switch and disconnect the power cable. It may cause an unex-
pected accident.

Do not use chemicals containing benzine, thinner or abrasives. The cover surface may be altered or 
deformed.

Do not lubricate the machine with lubricating oil. 
There is a risk of failure.

Keep children away from this machine.

Содержание TX300P-1800

















Отзывы: