15
14. Recovery method of defective nozzle discharge
When this printer has not been used for an extended period of time, or depending on the environmental
temperature, the discharge at the nozzles could become unstable. In such a case, the following methods may be
taken to recover the status of the nozzles.
For symptoms 1 to 4 in P.14 “The examples of defective printing”
15. Supplies
*: Tx300P-1800 MkII only, when using the Sb411+TP400 or Sb411+Sb420 ink sets.
1. Daily maintenance and care
Perform the cleaning of the parts described in this document.
2. Performing Head Cleaning (normal). Refer to Chapter 2 of
Operation Manual.
After having performed the care and maintenance stated in step 1, perform
the cleaning of the heads in accordance with the procedures stated in
Operation Manual.
Perform test printing and
check
(Chapter 2 of Operation Manual)
In the event nozzle missing etc. have not been improved
3. Performing Head Cleaning (hard). Refer to Chapter 2 of
Operation Manual.
If the nozzle missing does not disappear even after repeating the head
cleaning (normal) several times, reset the cleaning mode to "hard" and
perform the cleaning again.
Perform test printing and
check
(Chapter 2 of Operation Manual)
In the event nozzle missing etc. have not been improved
4. Perform the cleaning of the head nozzles. Refer to Chapter
4 of Operation Manual.
Perform the cleaning of the head nozzles. In this case, leaving time of the
cleaning liquid for maintenance shall be made [1 minute].
Perform test printing and
check
(Chapter 2 of Operation Manual)
In the event nozzle missing etc. have not been improved
5. Perform the cleaning of the head nozzles again. Refer to
Chapter 4 of Operation Manual
Reset the leaving time of the cleaning liquid for maintenance to [10
minutes], and perform the cleaning of the head nozzles again.
Perform test printing and
check
(Chapter 2 of Operation Manual)
• If the nozzle discharge does not recover even after operating above, contact your local
distributor, our sales office, or service center.
Product Name
Product No.
Product Name
Product No.
Cleaning Liquid
(MAINTENANCE
KIT)
Dye Sublimation Ink ink :Sb420
Dye Sublimation Ink ink :Sb421
Disperse dye ink :Dd400
Acid-dye ink :Ac400
Reactive-dye ink :Rc400
Reactive-dye ink :Rc500
Hybrid : Sb411+Sb420
ML003-2-K1
CP pat set
（
Cap Pad
）
SPA-0269
CAP ABSORBER KIT
SPA-0314
Waste ink tank (2L)
SPA-0246
Wiper kit 300TS
SPA-0271
Wiper kit 300Tx-II
*
SPA-0313
*
Textile Pigment ink: TP400
C-ML012-Z-
K1-1-KW
INK TRAY SPACER
SPA-0276
Hybrid : Sb420+TP400
Hybrid : Sb421+TP400
Hybrid : Sb411+TP400
300 fan filter
SPC-0774
Clean stick for the surroundings of the head 50pcs
SPC-0527
Pinch rollers
SPA-0275
Techno wipe for the surroundings of the head
SPC-0855
MEDIA HOLDER Tx
SPA-0278
Rubber stopper for 2L case
SPA-0250
MALE CONNECTOR
ABSORBENT FOR MBIS
SPA-0625
