background image

1

Color Inkjet Printer Tx300P-1800/Tx300P-1800 MkII

Requests for Care and Maintenance

This machine is a precision machine equipped with extremely fine mechanisms. Especially, the nozzle sur-
face of the heads from which the ink is discharged is affected even by a slightest attachment of dust or paper 
powder and the proper printing results could not be obtained. With a view to using this machine in a better 
condition, we would like to recommend performing the following care and maintenance on daily basis.

1. When to care

When to care

What to care

Reference Page

When the Machine Is Not Used 
for a Long Time

Perform “Storage Wash”

P.3

When replace the media

Ink receiving spacer

P.4

Once a day
(at the end of the daily work)

Surroundings of the heads

P.4

Capping station

P.5

Wiper

P.6

Media press

P.7

Media sensor

P.7

Once a week
(at the end of the work on 
weekend)

Cleaning the Platen

P.8

Cleaning folding bar (take-up side)

P.8

Cleaning the tension roller

P.9

Exterior

P.9

Waste ink tank

P.9

Ink Discharge Passage

P.9

Clean the edge of the head nozzle surface
(Only for Sb411+TP400, Sb411+Sb420 ink set)

P.10

Once a month

Fill up ink
(Only for Sb411+TP400 ink set)

P.10

When the platen is replaced
(Tx300P-1800 MkII only)

Cleaning the Platen

P.11

Ink receiving spacer

P.10

Media press

P.10

In the event of damage, defor-
mation, excessive dirt, or when 
periodic replacement is 
required

Replacement of supply parts
fan filter / Wiper / CP pat / Pinch rollers / Rubber stopper 
for 2L case / MALE CONNECTOR ABSORBENT FOR 
MBIS

P.12

Tools required for maintenance

• Cleaning stick (SPC-0527)
• Cleaning Liquid
• Cotton swab
• Safety glasses
• Gloves
• Soft fabric
• Techno wipe (SPC-0855)

• The maintenance cleaning liquid is different by use ink type.Use the cleaning liquid dedicated for the ink 

being used.

Содержание TX300P-1800

















Отзывы: