manualshive.com logo in svg

MIMAKI OPT-J0475, Руководство по эксплуатации, Страница: 17 / 27

Поделиться
Скачать
MIMAKI OPT-J0475 Скачать руководство пользователя страница 17

17

Replace 2L ink pack

Do as follows when [INK END] or [INK NEAR END] is displayed on the sub-display.

When [INK END] is displayed

When the ink in the ink pack runs out, a message prompting ink replacement will be displayed. Replace the ink pack with the fol-
lowing procedure.

1

Press the [ENTER] key to cancel the message dis-
play.

2

Push the lever down and then remove the 2L eco-
case.

3

Open 2L eco-case, and then remove the 2L ink 
pack.

4

Refer to Step 3 and following of P.15 "Set 2L ink pack" and set a new 2L ink pack.

• Be sure to wear the included safety glasses and gloves as there is a danger of ink splashing.
• When exchanging the ink tank, perform it after curing the surroundings with a waste etc. The surroundings become dirty with

ink dripping from the supply pipe.

• Ink tank has an expiry date. It is usable until the second month after the expiry date stated in the ink tank, but it will be unus-

able after 3 months. Replace the ink tank as soon as possible.

Information

Please exchange ink tank
and ink IC
After replacing the ink IC,
ink supply is started.
(Time: about 3 minutes)

OK

Lever

Содержание OPT-J0475




























Отзывы:

Нет отзывов