MIMAKI OPT-J0475 Скачать руководство пользователя страница 16 | Manualshive

Страница: 16 / 27

MIMAKI OPT-J0475 Скачать руководство пользователя страница 16

16

4

Put 2L ink pack in 2L eco_case.

(1) Open the 2L eco-case.

• Push the knob and spread the case to the left and right.

(2) Remove the seal from the 2L ink pack connector.

(3) Make the connector part downward and then place the 2L ink pack and

then close the 2L eco-case.

5

Attach the 2L eco-case to the conversion set of
the ink supply unit.

• A click sounds and the lever goes up.
• When ink is supplied to the connected printer, the EMPTY lamp goes off.

• The remained seal may cause a large amount of ink leak out

when removing the 2L ink pack from the base. Be careful that
there are no seal remnants.

• When inserting the 2L ink pack, adjust the shape according to

the label in the 2L eco-case. If you place an ink pack without
adjusting its shape, the ink may not be used up.

• Before closing the 2L eco case, confirm that the connector of

the ink pack is fitted to the groove of 2L eco-case. If the con-
nector does not fit with the groove, the ink supply may not be
performed.

• Push the 2L eco-case as far as it goes. If you does not push it

enough, the ink may not be supplied.

OK

No good

Remained seal

Groove part

«
...
14
15
16
17
18
...
»

Содержание OPT-J0475




























Отзывы:

Нет отзывов