MIMAKI JV33-260BS, Руководство по эксплуатации

Страница: 196 / 232

6-12
Message Cause Solution
An error occurred in the wiper control.
Turn off the main power to the machine
and turn it on after a while.
If the same error message appears
again, contact your local distributor to
call for service.
Paper could not be detected.
The media set position or media itself
is not proper.
If the same error message appears
again even after setting the media
properly, contact your local distributor
to call for service.
The set position of the media is not
proper. The media detection has not
completed.
Set the media to the proper position
again. (
P.2-9
、
P.2-20
、
P.2-26)
Y-origin could not be detected.
Turn off the main power to the machine
and turn it on after a while.
If the same error message appears
again, contact your local distributor to
call for service.
An abnormality occurs in the control
system of the heavy-duty take-up
device.
An abnormality occurs in the control
system of the heavy-duty feeding
device.
An abnormality occurs in the control
system of the heavy-duty take-up
device.
If the error message is displayed even
if you set the medium properly, once
turn OFF the power supply and after a
while, turn it ON again.
If the error message is displayed again,
contact our service and sales office.
An abnormality occurs in the control
system of the heavy-duty feeding
device.
An abnormality occurs in the heavy-
duty take-up device.
Confirm the connection of the heavy-
duty take-up device.
If the error message is displayed even
if you connect the device properly,
once turn OFF the power supply and
after a while, turn it ON again.
If the error message is displayed again,
contact our service and sales office.
The heavy-duty take-up device is not
connected.
Turn off the main power to the machine
and turn it on after a while.
If the same error message appears
again, contact your local distributor to
call for service.
The heavy-duty take-up device is
connected to a wrong position.
An abnormality occurs in the heavy-
duty take-up device.
An abnormality occurs in the heavy-
duty feeding device.
Confirm the connection of the heavy-
duty feeding device.
If the error message is displayed even
if you connect the device properly,
once turn OFF the power supply and
after a while, turn it ON again.
If the error message is displayed again,
contact our service and sales office.
* * * * * E R ROR 4 6 * * * * *
W I P E R
* * * * * E R ROR 5 0 * * * * *
ME D I A S E T POS I T I ON
* * * * * E R ROR 5 0 * * * * *
ME D I A D E T E C T
* * * * * E R ROR 5 1 * * * * *
Y - OR I G I N
* * * * * E R ROR 6 4 * * * * *
T A K E - U P VO L T AGE
* * * * * E R ROR 6 4 * * * * *
F E E D E R VO L T AGE
* * * * * E R ROR 6 5 * * * * *
T A K E - U P T E N S I ON - B A R
* * * * * E R ROR 6 5 * * * * *
F E E D E R T E N S I ON - B A R
* * * * * E R ROR 6 7 * * * * *
T A K E - U P UN I T 0 0
* * * * * E R ROR 6 7 * * * * *
T A K E - U P UN I T 0 1
* * * * * E R ROR 6 7 * * * * *
T A K E - U P UN I T 0 2
* * * * * E R ROR 6 7 * * * * *
T A K E - U P UN I T 0 4
* * * * * E R ROR 6 7 * * * * *
F E E D E R UN I T 0 0
Downloaded From ManualsPrinter.com Manuals