manualshive.com logo in svg

MIMAKI JV33-260BS, Руководство по эксплуатации

Поделиться
Скачать
MIMAKI JV33-260BS Скачать руководство пользователя страница 152

5-14

When not using for a long term (CUSTODY WASH)    (firmware Ver.3.20 or older)

When the operation of the machine is to be suspended for a week or more, use the [CUSTODY WASH] function
to clean the nozzles in the heads and the ink discharge passage.
After the cleaning, store the machine properly.
This function is available for the firmware Ver. 3.20 or earlier.

1

Press the 

 key in the local mode.

2

Select [CUSTODY WASH] by pressing the 

 keys.

3

Press the 

 key.

• The carriage moves onto the platen.

4

Clean the wiper and the bracket.

(1)

Open the front cover then pull out it by holding projections at both ends of the wiper.

(2)

Clean the wiper and bracket with a clean stick dipped in cleaning solution for maintenance.
(SPC-0563)

(3)

Insert it in the original position by holding the projections at both ends of the wiper.

5

Press the 

 key.

Check the followings 

in advance.

Is  [NEAR END] or [NEAR END] displayed ?

• The cleaning solution or ink is absorbed in washing.

At this time, washing is unable to operate if the ink end or near-end is detected.

• Replace it with a cartridge undetected for the ink end or the like.

• When the following messages are indicated, check the waste ink tank, and then operate it, referring to 

P.5-40 “If Waste ink tank confirming message is displayed” according to the situation.

C o n f i r m a w a s t e   t a n k
C o n t i n u e <

> E x c h a n g e

C o n f i r m a w a s t e   t a n k
E x c h a n g e

:

e

n t

S T . MA I NT ENANCE
CARR I AGE  OUT

< e n t >

S T . MA I NT ENANCE
CUS TODY WASH

< e n t >

WI PER C L EAN I NG
COMP L E T ED ( NEX T )

: e n t

Projection

F i l l

t h e

l i q u i d

COMP L E T ED ( NEX T )

: e n t

Downloaded From ManualsPrinter.com Manuals

Содержание JV33-260BS









































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды