MIMAKI JV33-130BS, Руководство по эксплуатации

Страница: 144 / 206

4-26
If dots misalign
When the thickness of the media, the height of the head, or the type of the ink used is changed, follow the
steps below and adjust the ink drop position for Bi-directional (Bi) printing to print properly.
Example of Pattern printing
1
Set a media, and then set the printing origin. ( P.2-6)
• For printing the pattern, a larger media than 500mm width x 400mm feeding is required.
2
Select [DROP POSITION] of the maintenance menu.
(1) Press the key in the local mode.
(2) Select [MAINTENANCE] by pressing the keys then press the key.
(3) Select [DROP POSITION] by pressing the keys.
(4) Press the key.
3
Press the key to start the pat-
tern printing.
• Plural pattern types are printed. (in order of printed, called as Pattern 1, 2, 3...)
4
Correct the dot position of the pattern 1
by pressing the
keys.
• Correction value : -40 to 40
• Check the test pattern. A correction value is at the position where an outward way and a
return way are on one line.
• If the correction value is not between -40 and 40, adjust the height of head then redo the
operations from the step 2.
5
Press the key.
The dots at the fourth position counted from the zero
position in the positive direction form a straight line.
In this case, the dot position correction value is 4.0.
Output
direction
PR I N T I NG
P L E A S E WA I T
DROP POS I T I ON
P A T T ERN 1
= 0 . 0