23
For roll media
Face out / face in switch button
Set using the “Face out winding / Face in winding” switch button on the first page of the operation panel
UNWINDER screen.
UNWINDING FROM UP ···················· Face out
UNWINDING FROM DOWN ··············· Face in
Automatic operation
Check the position of the tension bar.
Adjust the tension of the media so that the tension bar is almost midway between ascending and
descending ends.
Use the feed on the printer main unit or the “manual rotation” button on the option operation panel of the
printer main unit.
Check the error.
If an error has occurred, press
(error history display button) to check the content, remove the
cause, and then press the reset button.
An error will occur if the beam sensor is blocked during media setting.
When the centering unit is used, the face in cannot be set.
1
2
