MIMAKI Electric slicers, Руководство по уходу

Страница: 2 / 8

2
2. Daily care
Around heads
Dust accumulates most around heads mostly, and it effects the operation and printing results for this plotter,
and also as this plotter has very delicate mechanism, need enough attention to the care for it. Gelled ink and
dust adhere to the bottom of a slider and around heads, scour off it using a cotton bud. Do not touch the head
nozzle.
Around heads contaminated Clean with a cotton bud
Capping station
( Operation manual Chapter3 “Cleaning the wiper and ink caps”)
Around the cap is also the place dust accumulates. Clean to prevent dust adhering to the heads.
• When using SS ink or SS2 ink or TS ink : Cleaning fluid RS (SPC-0336)
• When using MS2 ink or ES3 ink or Eco-HS1 ink : Cleaning fluid MS2 (SPC-0369)
Ink cap Guide of wipe Inside of the wiper cover
Wiper
( Operation manual Chapter3 “Cleaning the wiper and ink caps”)
Ink and paper powder accumulate on the wiper. Confirm the condition, and clean it if it's dirty. In case it
deformed, replace to the new one. ( Operation manual Chapter5 “When the message [REPLACE WIPER]
is displayed )
Dirty wiper Deformed wiper