MIMAKI CF22-1225, Меры безопасности

Страница: 14 / 20

Safety Precautions
14
For safe operation
Precautions in installation
CAUTION
Do not restart the power until 30 seconds after turn off Do not put any matters on the cable
• If the machine is restarted, do not turn on the
power until 30 seconds after turning off.
The machine may be caused faulty function.
• Do not bend the power cable and the
communication cable, and do not placed any
matters. These cables may be broken and
heated, the power cable can cause fire or
electric shocks.
Do not climb on top of the machine Do not move your face in front of cut panel
• Please do not climb on top of the machine. It
may cause malfunction.
• Do not move your face and hands in front of the
cut panel while the machine is working.
The machine can wind and touch your hairs or
hands.
Do not dress baggy suits and accessories The machine is moved by our service engineer
only
• Do not work with dressing baggy suits and any
accessories, and also tie any long hairs.
• The machine is precision machine, so in case if
you require movement of the machine, please
contact to our service engineer.
CAUTION
A place exposed to direct sunlight A place that vibrates
• Do not install the machine at a place where the
temperature of the cut panel surface exceeds
60?C. The cut panel can deform or break down.
• The machine will fail to give correct results if
installed in a place that vibrates.
A place in which temperature and humidity A place filled with dirt, dust or tobacco smoke
• Use the machine under the following
environment.
Operating environment:
10 to 35 C
35 to 75 % (Rh)
• The machine is a precision machine.
Do not use it in a place that is filled with dirt and
dust.
A plate that is not horizontal Near flammable materials
• If the machine is not leveled, the machine will
fail to give correct results and may be broken
down.
• When the blower is used fully open, the exhaust
port temperature becomes extremely high. Do
not place flammable materials near the blower
or in front of the exhaust port.
A place exposed to direct air blow from air conditioner, etc
• Cutting quality could be adversely affected.