MIMAKI AMF-250, Руководство по эксплуатации

Страница: 26 / 42

- 2.12 -
13. Pinch both edges of the media with Media
press to prevent the media edge curled.
14. Select Auto. The Action switch is to be set
[Roll out] (when the media backside printing).
• Be sure to select the Auto above before drawing
the media, or the Auto media feeder does not
work during drawing.
If drew without selecting the Auto, the buzzer
sounds because the Auto Media feeder is out of
operation.
When the buzzer sounds, operate the following
steps to stop the buzzer:
a. Press END key or REMOTE key on the
operation panel. (of the printer)
b. Set the Action switch on the Auto Media
feeder to [Stop].
c. Open the press cover of the guide pipe and
then loose the media. The buzzer stops at
this time.
d. Close the press cover of the guide pipe.
e. Operate the step 12.
15. When the operation panel displays [MEDIA
SELECT], select the roll and press [ENTER]
key. The system detects the media width and
return to standby after detecting.
MEDIA SELECT
ROLL < > LEAF
Media press
Media
*Setting for the media backside printing