MIMAKI AMF-250, Руководство по эксплуатации

Страница: 21 / 42

- 2.7 -
Set the Media on the Auto Media Feeder
Execute the following procedure to setup the media to the Auto Media Feeder.
• When setting (changing) the media, it must be carried out by at least two
persons.
• Be careful about direction of the setting media, as the direction is executed
by the print facing outside (Surface Print) and the print facing inside (Back
Print).
When setting the media, it must be carried out by at least two persons.
In case of the large size media, the media should be rolled with print surface facing inside (Back
Print).
Make sure of the media type when setting the media, as it may be the media with print surface
facing outside (Surface Print).
Inside (BacksidePprint) Outside (Surface Print)