2
WARNING
Read and understand all instruc-
tions.
Failure to follow all instructions
serious personal injury.
Save all warnings and in-
structions for future reference.
•
Save these instructions -
This operator's manual
contains important safety and operating instructions.
tool.
WARNING
The device produces visible laser
beams, which are emitted from the
•
•
•
Laser light - Do not stare into beam or view
directly with optical instruments. Do not point
laser light at others.
Laser light can cause eye
damage.
•
Do not allow persons unfamiliar with the tool,
these safety instructions, and the tool's opera-
tor's manual to operate the tool.
This tool can be
dangerous in the hands of untrained users.
Do not overreach. Keep proper footing and
balance at all times.
This enables better control
of the tool in unexpected situations.
•
•
Do not dispose of tool or batteries together with
household waste material!
Tool and batteries that
have reached the end of their life must be collected
separately and returned to an environmentally
compatible recycling facility.
CAUTION
Use of controls or adjustments or
performance of procedures other
-
ous radiation exposure.
GENERAL POWER TOOL SAFETY
WARNINGS
LASER SAFETY
This device complies with AS/NZS 60825.1,
Class 2 Laser.
PERSONAL SAFETY
BATTERY USE AND CARE
USE AND CHARGE ONLY REDLITHIUM
®
USB
BATTERIES IN THIS USB RECHARGEABLE
TOOL. OTHER TYPES OF BATTERIES MAY
CAUSE PERSONAL INJURY AND DAMAGE.
BEFORE USING THE BATTERY AND TOOL,
READ THIS OPERATOR’S MANUAL AND ALL
LABELS ON THE BATTERY AND TOOL.
USE ONLY WITH LISTED/CERTIFIED ITE
POWER SUPPLY.
Others may result in a risk of
fire, electric shock or personal injury.
CHARGE IN A WELL VENTILATED AREA. Do
not block charger vents.
Keep them clear to
allow proper ventilation. Do not allow smoking or
open flames near a charging battery. Vented gases
may explode.
MAINTAIN CORD.
When unplugging charger, pull
plug rather than cord to reduce the risk of damage
to the electrical plug and cord. Never carry charger
by its cord. Keep cord from heat, oil and sharp
edges. Make sure cord will not be stepped on,
tripped over or subjected to damage or stress. Do
not use charger with damaged cord or plug. Have
a damaged charger replaced immediately.
USE ONLY RECOMMENDED ATTACHMENTS.
Use of an attachment not recommended or sold by
the battery charger or battery manufacturer may
result in a risk of fire, electric shock or personal
injury.
TO REDUCE THE RISK OF ELECTRIC SHOCK,
always unplug charger before cleaning or
maintenance.
DO NOT BURN OR INCINERATE BATTERY
PACKS.
Battery may explode, causing personal
injury or damage. Toxic fumes and materials are
created when battery are burned.
DO NOT CRUSH, DROP, OR DAMAGE battery.
Do not use a battery or charger that has received a
sharp blow, been dropped, run over, or damaged in
any way (e.g., pierced with a nail, hit with a
hammer, stepped on).
DO NOT DISASSEMBLE.
Incorrect reassembly
may result in the risk of electric shock, fire or
exposure to battery chemicals. If it is damaged,
take it to a
MILWAUKEE
®
service facility.
BATTERY CHEMICALS CAUSE SERIOUS
BURNS.
Never allow contact with skin, eyes, or
mouth. If a damaged battery leaks battery
chemicals, use rubber or neoprene gloves to
dispose of it. If skin is exposed to battery fluids,
wash with soap and water and rinse with vinegar.
If eyes are exposed to battery chemicals,
immediately flush with water for 20 minutes and
seek medical attention. Remove and dispose of
contaminated clothing.
DO NOT SHORT CIRCUIT.
A battery pack will
short circuit if a metal object makes a connection
between the positive and negative contacts on the
battery pack. Do not place a battery pack near
anything that may cause a short circuit, such as
coins, keys or nails in your pocket. Do not allow
fluids to flow into battery pack. Corrosive or
conductive fluids, such as seawater, certain
industrial chemicals, and bleach or bleach
containing products, etc., can cause a short circuit.
A short circuited battery pack may cause fire,
personal injury, and product damage.
Store your battery and tool in a cool,
dry place.
Do not store battery where temperatures may
exceed 50°C (120°F) such as in direct sunlight, a
vehicle or metal building during the summer.
•
•
•
•
•
•
•
•
•
•
•
•
•
SPECIFIC SAFETY RULES FOR
LASER LEVELS
Maintain labels and nameplates.
These carry
important information. If unreadable or missing,
contact
MILWAUKEE
®
for a replacement
•
When
instrument will not be used for a long period, place
it in storage after removing batteries.
• Always use common sense and be cautious when
using tools.
It is not possible to anticipate every
situation that could result in a dangerous outcome.
Do not use this tool if you do not understand these
operating instructions or you feel the work is beyond
your capability; contact Milwaukee Tool or a trained
professional for additional information or training.
ADDITIONAL BATTERY SAFETY RULES
WARNING
WARNING
To reduce the risk of fire, personal
injury, and product damage due to
a short circuit, never immerse your tool, battery
pack or charger in fluid or allow a fluid to flow inside
them. Corrosive or conductive fluids, such as
seawater , certain industrial chemicals, and bleach
or bleach-containing products, etc., can cause a
short circuit.
Do not charge non-rechargeable
batteries.
