Milwaukee PLH 28 E, Руководство пользователя

Страница: 12 / 24

WARNING!!
Read all safety warnings and all instructions. Failure to
follow the warnings and instructions may result in electric shock,
fire and/or serious injury.
Save all warnings and instructions for future reference.
HAMMER SAFETY WARNINGS
Wear ear protectors.
Exposure to noise can cause hearing loss.
Use auxiliary handle(s), if supplied with the tool. Loss of
control can cause personal injury.
Hold power tool by insulated gripping surfaces, when
performing an operation where the cutting accessory may
contact hidden wiring or its own cord. Cutting accessory
contacting a „live“ wire may make exposed metal parts of the
power tool „live“ and could give the operator an electric shock.
TECHNICAL DATA
Rotary Hammer
PLH 28 E
220-230 V
PLH 28 E
110-120 V
Rated input 800 W 800 W
Output 400 W 400 W
No-load speed 0-1500 min
-1
0-1500 min
-1
Speed under load max. 0-1000 min
-1
0-1000 min
-1
Rate of percussion under load max. 0-4000 min
-1
0-4000 min
-1
Impact energy per stroke according to EPTA-Procedure 05/2009 4,8 J 4,8 J
28 mm 28 mm
13 mm 13 mm
40 mm 40 mm
Drilling capacity in concrete
Drilling capacity in steel
Drilling capacity in wood
Light core cutter in bricks and limestone 82 mm 82 mm
Chuck neck diameter 54 mm 54 mm
Weight according EPTA-Procedure 01/2003 3,4 kg 3, 4 kg
Noise information
Measured values determined according to EN 60 745. Typically, the A-weighted noise levels of the tool are:
Sound pressure level (Uncertainty K =3dB(A))
Sound power level (Uncertainty K =3dB(A))
90,5 dB (A)
101,8 dB (A)
90,5 dB (A)
101,8 dB (A)
Wear ear protectors!
Vibration information
Vibration total values (triaxial vector sum) determined according to EN 60745
Hammer-drilling into concrete:
Vibration emission value a
h, HD
10,6 m/s 2
1,5 m/s 2
10,6 m/s 2
1,5 m/s 2
Uncertainty K =
Chiselling:
Vibration emission value a
h, Cheq
Uncertainty K =
6,81 m/s
2
1,5 m/s
2
6,81 m/s
2
1,5 m/s
2
WARNING
The vibration emission level given in this information sheet has been measured in accordance with a standardised test given in EN 60745 and
may be used to compare one tool with another. It may be used for a preliminary assessment of exposure.
The declared vibration emission level represents the main applications of the tool. However if the tool is used for different applications, with
different accessories or poorly maintained, the vibration emission may differ. This may significantly increase the exposure level over the total
working period.
An estimation of the level of exposure to vibration should also take into account the times when the tool is switched off or when it is running
but not actually doing the job. This may significantly reduce the exposure level over the total working period.
Identify additional safety measures to protect the operator from the effects of vibration such as: maintain the tool and the accessories, keep
the hands warm, organisation of work patterns.
Additional Safety and Working Instructions:
Use protective equipment. Always wear safety glasses when working
with the machine. The use of protective clothing is recommended,
such as dust mask, protective gloves, sturdy non-slip footwear,
helmet and ear defenders.
The dust produced when using this tool may be harmful to health.
Do not inhale the dust. Use a dust absorption system and wear a
suitable dust protection mask. Remove deposited dust thoroughly,
e.g. with a vacuum cleaner.
Keep mains lead clear from working range of the machine. Always
lead the cable away behind you.
Do not machine any materials that present a danger to health (e.g.
asbestos).
When working in walls ceiling, or floor, take care to avoid electric
cables and gas or waterpipes.
Switch the device off immediately if the insertion tool stalls! Do not
PLH 28 XE
220-230 V
800 W
400 W
0-1500 min
-1
0-1000 min
-1
0-4000 min
-1
4,8 J
28 mm
13 mm
40 mm
82 mm
54 mm
3,6 kg
90,5 dB (A)
101,8 dB (A)
10,6 m/s 2
1,5 m/s 2
6,81 m/s 2
1,5 m/s
2
10 English