Milwaukee MXF C, Руководство пользователя

Страница: 7 / 24

7
English
7
CHARACTERISTICS
After inserting the battery into the reception of the charger,
charging begins automatically (red control lamp is illuminated
continuously).
When a hot or cold battery pack is inserted into the charger
(
fl ashing red lamp), charging begins automatically when the
battery reaches the correct charging temperature (0 °C – 40
°C). The maximum charging current is
fl owing when the
temperature of the li-ion battery is between 0 °C and 30 °C.
The battery’s charging time is between 55 minutes and 90
minutes, depending on the state of discharge.
After the battery is fully charged, the LED on the charger
changes from red to green.
Remove the battery pack from the product if it needs
recharging. MILWAUKEE battery packs do not develop a
memory when charged. The battery packs do not have to be
completely discharged before it can be recharged.
Unplug battery chargers and remove battery packs when not in
use. No battery pack damage occurs if the charger and battery
pack are left plugged in.
The charger keeps the battery pack fully charged if it is left on
the charger. The light indicator remains the same as normal
charging.
If the light indicator
fl ashes red and green, check that the
battery pack is fully seated into the bay. Reinsert the battery
pack. If the light continues to
fl ash red and green, remove the
battery pack and unplug the charger for at least 2 minutes.
After 2 minutes, plug the charger and insert the battery pack.
If the problem persists, contact a MILWAUKEE service centre.
LIGHT INDICATORS
Continuous red Charging
Slow fl ashing green Approaching full charge
Continuous green Charging is complete
Fast fl ashing red Battery or charger is too
hot/cold - charging begins
when the battery or charger
reaches correct charging
temperature
Flashing red/green Damaged or faulty battery
pack or charger
TRANSPORTING LITHIUM BATTERIES
Lithium-ion batteries are subject to the Dangerous Goods
Legislation requirements.
Transportation of lithium-ion batteries must be done in
accordance with local, national, and international provisions
and regulations.
●
Batteries can be transported by road without further
requirements.
●
Commercial transport of lithium-ion batteries by third parties
is subject to Dangerous Goods regulations. Transport
preparation and transport are exclusively to be carried out
by appropriately trained persons, and the process must be
accompanied by corresponding experts.
When transporting batteries:
●
Ensure that battery contact terminals are protected and
insulated to prevent short circuit.
●
Ensure that the battery pack is secured against movement
within packaging.
●
Do not transport battery packs that are cracked or leaking.
Check with the forwarding company for further advice.
MAINTENANCE
If the supply cord is damaged, it must be replaced by the
manufacturer, its service agent or similarly quali
fi ed persons in
order to avoid hazards.
Use only MILWAUKEE accessories and spare parts. Should
components that have not been described need to be replaced,
contact one of our MILWAUKEE service agents (see our list of
service addresses).
If needed, an exploded view of the product can be ordered.
State the product type and the serial number on the label, and
order the drawing at your local service centres.
SYMBOLS
Read the instructions carefully before
starting the product.
Do not burn used battery packs.
Never charge a damaged battery pack.
Replace a damaged battery pack with a
new one.
Do not dispose of electric tools, batteries/
rechargeable batteries together with
household waste material.
Electric tools and batteries that have
reached the end of their life must be
collected separately and returned to an
environmentally compatible recycling facility.
Check with your local authority or retailer for
recycling advice and collection point.
The product is suitable only for indoor use.
Never expose the product to rain.
Double insulated