![background image](http://html1.mh-extra.com/html/milwaukee/mi415/mi415_user-manual_1798908001.webp)
USER MANUAL
MI415
PRO Turbidity Meter
milwaukeeinstruments.com (USA & CAN)
milwaukeeinst.com
BATTERY REPLACEMENT
Battery replacement must only take place in a non-
hazardous environment.
Simply rotate the battery cover on the back of the meter.
Detach the battery from the terminals and attach a fresh
9V battery while paying attention to the correct polarity.
Insert the battery and replace the cover.
ACCESSORIES
MI0004
Tissue for wipping cuvets (4 pcs)
MI0005
9V battery (1 pc)
MI0011
10 mL glass cuvete (2 pcs.)
MI0012
Cap for 10 mL glass cuvet (2 pcs.)
MI0013
Stopper for 10 mL glass cuvet (2 pcs.)
MI515-100
Calibration standards: 0, 10, 500 FNU (3 x
30 mL dropper bottles)
CERTIFICATION
Milwaukee Instruments conform to the CE
European Directives.
Disposal of Electrical & Electronic
Equipment.
Do not treat this product as
household waste. Hand it over to the
appropriate collection point for the recycling of electrical
and electronic equipment.
Disposal of waste batteries.
This product
contains batteries. Do not dispose of them
with other household waste. Hand them
over to the appropriate collection point for recycling.
Please note: proper product and battery disposal
prevents potential negative consequences for human
health and the environment. For detailed information,
contact your local household waste disposal service or
go to
www.milwaukeeinstruments.com
(USA & CAN)
or
www.milwaukeeinst.com
.
RECOMMENDATION
Before using this product, make sure it is entirely suitable
for your specific application and for the environment in
which it is used. Any modification introduced by the user
to the supplied equipment may compromise the meter’s
performance. For your and the meter’s safety do not use
or store the meter in hazardous environment. To avoid
damage or burn, do not perform any measurement in
microwave ovens.
WARRANTY
These instruments are warranted against defects in
materials and manufacturing for a period of 2 years from
the date of purchase. This warranty is limited to repair or
free of charge replacement if the instrument cannot be
repaired. Damage due to accidents, misuse, tampering
or lack of prescribed maintenance is not covered by
warranty. If service is required, contact your local
Milwaukee Instruments Technical Service. If the repair is
not covered by the warranty, you will be notified of the
charges incurred. When shipping any meter, make sure it
is properly packaged for complete protection.
ISTMI415 07/20
SATISFACTION
GUARANTEED
MI415
PRO T
urbidi
ty Me
ter