4
WARNING
To reduce the risk of injury, blades
must extend beyond the shoe and
workpiece throughout the stroke. Blades may
shatter if they impact the workpiece or shoe.
Stroke
Stroke
Adjusting the Pivot Shoe
1.
The shoe can be adjusted
forward or backward to eight
positions to take advantage
of the unused portion of the
blade or for special jobs re-
quiring low blade clearance.
2.
To adjust the shoe, press
the shoe release buttons
simultaneously and slide the
shoe forward or backward
to the desired position. Tug
on shoe to make sure it is
securely locked in place.
After adjusting the shoe,
slowly pull the trigger to
be sure the blade always
extends beyond the shoe and the workpiece
throughout the stroke.
WARNING
reco
Only use
mmended
accessorie
for thi
s
s tool. Others
may be hazardous.
Selecting a Blade
Installing and Removing Blades from the
Quik-Lok
TM
Blade Clamp
Remove battery pack before changing blades. Make
sure the spindle and blade clamp areas are clean.
Metal chips and sawdust may prevent the Quik-Lok
TM
Blade Clamp from clamping securely.
1. Remove battery pack.
2.
3. The spring loaded mechanism will clamp the blade
4. Tug on blade to make sure it is securely locked in
place.
5.
Quik-Lok
TM
Blade Clamp Maintenance
Removing broken blades from the
Quik-Lok
TM
Blade Clamp
Broken blades can be removed by the following
methods.
•
• If the collar resists, slide the release lever back and
forth to shake debris loose.
•
• Remove battery pack before removing blades.
• Point the tool downward, slide up and hold the
release lever, and shake the tool up and down (
DO
NOT
turn the tool on while holding the blade clamp
open). The shank of the broken blade should drop
out of the clamp.
• If shaking the tool doesn't work...
In most cases, a corner of the broken blade will
extend beyond the blade clamp. Slide up and hold
the release lever, and pull the broken blade out of
the clamp by this corner.
• If the broken stub doesn't extend far enough to be
grabbed by its corner, use a thin blade with small
teeth (such as a metal cutting blade) to hook the
blade that is jammed in the clamp while holding up
the release lever, and pull it out.
The Quik-Lok
TM
Blade Clamp can be used with all
13mm (1/2") shank universal Sawzall
TM
reciprocating saw blades. Use
MILWAUKEE
®
High
Performance Super Sawzall
TM
reciprocating saw
blades for best performance. When selecting a
blade, choose the right type and length.
Many types of blades are available for a variety of
applications: cutting metal, wood, nail-embedded
wood, scroll cutting, roughing-in, and contours.
Many lengths are also available. Choose a length
long enough to extend beyond the shoe and the
work throughout the stroke. Do not use blades less
than 102mm (4") long since they won't extend
beyond the shoe throughout the stroke.
Periodically lubricate Quik-Lok
TM
Blade Clamp
with a dry lubricant such as graphite.
Do not operate Sawzall
™
reciprocating saw without
shoe. Striking the spindle against workpiece may
damage the tool.
ASSEMBLY
WARNING
Recharge only with the charger
-
manual supplied with your charger and battery.
Removing/Inserting the Battery
To
remove
the battery, push in the release buttons
and pull the battery pack away from the tool.
changing or removing accessories.
WARNING
Always remove battery pack before
To insert the battery, slide the pack into the body of
the tool. Make sure it latches securely into place.
Depending on the
job, the blade may
be inserted with the
teeth facing up or
down. To install a
blade, insert the
blade into the clamp
until the tang butts
against the collar.
To remove a blade, slide the release lever up and
pull the blade from the tool. Be careful when
handling hot blades.
Periodically clean dust and debris from the
Quik-Lok
TM
Blade Clamp with dry compressed air.
Содержание M18 FUEL SAWZALL CSX2
Страница 7: ......
