Milwaukee M18 FUEL F2LM21, Руководство оператора

Страница: 10 / 12

Sharpening the Cutting Blade
WARNING
8.
9.
1. Clean the blade.
2. Sharpen a dull blade equally at each end to main-
shavings to achieve a sharp blade.
3. Check the blade's balance by supporting it on a
nail through its centre hole. Hold the nail horizon-
tally. If either end of the blade rotates downward,
remove some metal from the heavy or lower end.
Repeat until the blade is balanced evenly on the
nail. It is balanced when neither end drops.
Maintaining Lawn Mower
Keep cutting edges sharp and
clean for best and safest
performance. Use a recommended
MILWAUKEE
®
replacement blade only. Use
caution when servicing blade. Wrap the blade or
wear gloves. Replace damaged blade. Do not
repair damaged blade or alter blade mounting
holes.
Keep your lawn mower in good repair by adopting a
regular maintenance program. Inspect your lawn
mower for issues such as undue noise,
misalignment or binding of moving parts, breakage
of parts, or any other condition that may affect the
lawn mower operation. Return the lawn mower to a
MILWAUKEE ® service facility for repair.
If the lawn mower does not start or operate at full
power with a fully charged battery pack, clean the
contacts on the battery pack. If the lawn mower still
does not work properly, return the lawn mower to a
MILWAUKEE
®
service facility for repairs.
10
WARNING
Storage
Cleaning
WARNING
Use only recommended accesso-
NOTICE
Repairs
ACCESSORIES
ries. Others may be hazardous.
To reduce the risk of personal
injury and damage, never
immerse your lawn mower, battery pack or
charger in liquid or allow a liquid to flow inside
them.
When not in use, lawn mower
should be stored in an indoor dry
and locked-up place – out of reach
of children. Remove batteries for
storage. When lawn mower stored in
upright position, ensure both handle
adjustment knobs are in the locked
position with pins engaged.
Do not wash with a hose;
avoid getting water in lawn
mower and electrical connections.
Clean dust and debris from any vents. Keep lawn
mower clean, dry and free of oil or grease. Use only
mild soap and a damp cloth to clean, since certain
cleaning agents and solvents are harmful to plastics
and other insulated parts. Some of these include
gasoline, turpentine, lacquer thinner, paint thinner,
chlorinated cleaning solvents, ammonia and
household detergents containing ammonia. Do not
wash with a hose; avoid getting water in lawn
mower and electrical connections. Never use
flammable or combustible solvents around lawn
mowers.
For repairs, return the lawn mower to the nearest
authorised service centre.
For a complete listing of accessories, go online to
milwaukeetool.com.au / milwaukeetool.co.nz or
contact a distributor.
Reattach the spacer and blade motor fan after
cleaning. Install a new or sharpened blade. The
circle and triangle holes of the blade must align
onto the circle and triangle posts of the blade
motor fan. The shear plate edges must wrap
around the blade. Attach the square washer and
blade nut.
Tighten the blade nut using a 18 mm wrench or
socket.