manualshive.com logo in svg

Milwaukee HD18 AG125, Руководство оператора

Поделиться
Скачать
Milwaukee HD18 AG125 Скачать руководство пользователя страница 11

WARRANTY - AUSTRALIA and NEW ZEALAND

SERVICE - AUSTRALIA and NEW ZEALAND

MILWAUKEE

®prides itself in producing a premium quality product that is Nothing But Heavy Duty®. 

Your satisfaction with our products is very important to us! If you encounter any problems with the

 

operation of this tool, please contact your authorised 

MILWAUKEE

® dealer.

For a list of 

MILWAUKEE

® dealers, guarantee or service agents please contact 

MILWAUKEE

®

 

Customer Service or visit our website.

(Australia Toll Free Telephone Number 1300 645 928)

(New Zealand Toll Free Telephone Number 0800 645 928) 

 

or visit www.milwaukeetools.com.au / www.milwaukeetools.co.nz.

Please refer to Australian and New Zealand warranty supplied with tool. This warranty applies only to 

product sold in Australia and New Zealand.

961068030-02(A)

Milwaukee Electric Tool Corporation

13135 West Lisbon Road, Brookfield, Wisconsin U.S.A. 53005

Milwaukee Tool (Australia)

21 Kelletts Road, Rowville, VIC 3178 

Melbourne, Australia

Milwaukee Tool (New Zealand)

274 Church Street, Penrose, 

Auckland, 1061, New Zealand

Designed by Milwaukee Electric Tool Corp.

Professionally Made in China for Milwaukee Tool (Australia) / Milwaukee Tool (New Zealand)

Printed in China

Содержание HD18 AG125












Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды