Milwaukee CM 100, Оригинальное руководство пользователя

Страница: 15 / 23

12
GB GB
English
WARNING! Read all safety warnings and all instruc-
tions, including those given in the accompanying brochure.
Failure to follow the warnings and instructions may result in electric
shock, fire and/or serious injury.
Save all warnings and instructions for future reference.
SAFETY INSTRUCTIONS
Wear ear protectors. Exposure to noise can cause hearing loss.
Appliances used at many different locations including open air should
be connected via a residual current device (FI, RCD, PRCD) of 30mA
or less.
Always wear goggles when using the machine. It is recommended to
wear gloves, sturdy non slipping shoes and apron.
The dust produced when using this tool may be harmful to health.
Do not inhale the dust. Use a dust absorption system and wear a
suitable dust protection mask. Remove deposited dust thoroughly,
e.g. with a vacuum cleaner.
Before doing any work on the machine, pull the plug out of the
socket.
Only plug-in when machine is switched off.
Keep mains lead clear from working range of the machine. Always
lead the cable away behind you.
Sawdust and splinters must not be removed while the machine is running.
Never reach into the danger area of the machine when it is running.
Before use check machine, cable, and plug for any damages or
material fatigue. Repairs should only be carried out by authorised
Service Agents.
Keep the floor area free of loose material e.g. chips and cut-offs.
Make sure that the work piece is free from nails and other foreign ob-
jects.
SPECIFIED CONDITIONS OF USE
The chain mortiser is designed exclusively for mortising in solid wood.
Do not use this product in any other way as stated for normal use.
TECHNICAL DATA
Chain Mortiser
CM 100
Production code 4332 21 01...
... 000001-999999
Rated input 1350 W
No-load speed 3400 min
-1
Max. cutting depth 100 mm
Max. cutting width 40 mm
Overall dimensions 261 x 320 x 382 mm
Weight according EPTA-Procedure 01/2003 10 kg
Noise/Vibration Information
Measured values determined according to EN 61029.Typically, the A-weighted noise levels of the tool
are:
Sound pressure level (K=3dB(A))
Sound power level (K=3dB(A))
Wear ear protectors!
97 dB (A)
108 dB (A)
Total vibration values (vector sum in the three axes) determined according to EN 61029.
Vibration emission value a
h
Uncertainty K =
3,58 m/s
2
0,27 m/s
2
WARNING
The vibration emission level given in this information sheet has been measured in accordance with a standardised test given in EN 61029 and
may be used to compare one tool with another. It may be used for a preliminary assessment of exposure.
The declared vibration emission level represents the main applications of the tool. However if the tool is used for different applications, with
different accessories or poorly maintained, the vibration emission may differ. This may significantly increase the exposure level over the total
working period.
An estimation of the level of exposure to vibration should also take into account the times when the tool is switched off or when it is running
but not actually doing the job. This may significantly reduce the exposure level over the total working period.
Identify additional safety measures to protect the operator from the effects of vibration such as: maintain the tool and the accessories, keep
the hands warm, organisation of work patterns.