Milvus Robotics SEIT 1500, Руководство пользователя

Страница: 26 / 60

26 | P a g e
Version 2.1 (10/2020) EN
User Manual for SEIT 1500
5.2.2. Start Up
➢
Turn on “ on/off switch ” (1) located on the front panel by rotating it in CW direction,
➢
Wait for 10 seconds until “ start/stop button ” (2) starts blinking,
➢
After blinking starts, push the button (2),
Figure 5.9: Front panel view of SEIT 1500
➢
Wait for the system to boot for about 30 seconds. While the system is booting, “ led indicators ”
(See page 14) blink.
➢
You may hear contactors are switched on, and when “ led indicators ” (See page 14) become
solid , SEIT 1500 is up and running.
➢
One may check whether SEIT 1500 is ready or not through software interface part on this
manual. Also, for further procedures on SEIT 1500 such as mapping, localization, etc., check out
the software interface part.
If SEIT 1500 fails to start, power it OFF and:
➢
Verify the battery’s state of charge and connection.
OFF
ON