Milvus Robotics SEIT 1500, Руководство пользователя

Страница: 38 / 60

38 | P a g e
Version 2.1 (10/2020) EN
User Manual for SEIT 1500
•
Leveling MR AutoC – 1500;
“ Charging pads ” (See page 14) of SEIT 1500 and MR AutoC – 1500 ’s “ ±48 VDC charger pins ” (See
page 34) are not at the same level, initially. To level them, following steps must be done,
accordingly.
Figure 5.16: Leveling the docking station
1 Socket Head Cap Screws 3 Floor Plate
2 Socket Set Screws
➢
Slightly loosen the socket head cap screws (1),
➢
By rotating socket set screws (2) in CW and CCW direction, height of the MR AutoC –
1500 is adjusted.
➢
When the middle of SEIT 1500 ’s “ charging pads ” (See page 14) and MR AutoC – 1500 ’s
“ ±48 VDC charger pins ” (See page 34) are at the same level, secure the level by fastening
up socket head cap screws (1).