21 cm
14.85 cm
Assembly Step
Operation
(c) Fan Blade Assembly
• Locate flat surface at motor shaft.
• Insert Fan Blade to motor shaft with screw face to
flat surface .
• Tighten the fan blade screw.
Note: Please take note on the fan blade direction.
(d) Front Guard Assembly
• Insert screw into Guard Ring hole & turn clockwise by 2 cycle.
• Assembly the Guard Ring and Front Guard.
• Fit and match The Front Guard & Rear Guard together.
• Tighten up The Guard Ring screw.
(a) Speed Control
• "0" position is power off.
• Speed can be selected from "1 " which is minimum speed and up to speed "3" which is maximum
speed.
(b) Oscillation
• The oscillation function is controlled by synchronous motor. Turn the oscillation switch which at the
top of the motor to turn on.
(c) Vertical Angle
• Switch Off fan before adjust the vertical angle of the fan.
• Patent Design Neck Joint allowed to adjust angle by hand easily.
• Tighten the screw at Neck Joint to lock the angle.
3
4
Guard Ring
Guard Ring Cover
Screw for lock
the tilting angle
