Milnor Q4G Series, Схемы/Электрические компоненты, Страница: 15 / 60

Ê The Danger From Operating With Guards or Covers Removed
Like other types of industrial equipment, Milnor
®
washer-extractors utilize high voltage electrical
power and, depending on model, pneumatic and hydraulic power to drive a wide variety of moving parts.
Even with external power completely removed, the machine may contain energy such as tensioned springs,
compressed air, and heavy parts that may fall if released. As previously stated, the washer cylinder acquires
tremendous potential energy during extract, which must be absorbed by the brake or permitted sufficient
time to dissipate. Every guard, side panel, and door on the machine exists to isolate energized or mov-
ing parts from laundry personnel and must be securely in place for safe operation.
ELECTROCUTION HAZARD—Electric boxes and other electrical compo-
nents contain high voltage that will kill or seriously injure you on contact.
Power switch(es) on the machine disable only control circuit power, not
three-phase power.
☞
NEVER operate the machine with electric box doors open or any electrical con-
ductors exposed.
☞
NEVER attempt any electrical repair or troubleshooting unless you are a qualified
electrician, authorized to work on the machine. Before proceeding, service per-
sonnel must consult all applicable safety and service information displayed on
the machine and provided in the manuals.
CRUSH AND ENTANGLE HAZARDS—Moving components such as belts,
hydraulics, tilting machine housings, etc., can entangle, crush and/or
sever parts of your body, killing or severely injuring you.
☞
NEVER operate machine with any guards, covers, or side panels removed.
☞
NEVER permit anyone to place any part of his body inside any part of the machine
housing when the machine is operational.
☞
NEVER attempt any mechanical repair or troubleshooting unless you are a quali-
fied mechanic, authorized to work on the machine. Before proceeding, service
personnel must consult all applicable safety and service information displayed
on the machine and provided in the manuals.
☞
ALWAYS make sure personnel are clear of machine before starting it.
SAFETY INSTRUCTIONS
FOR WASHER-EXTRACTOR OPERATION
MSOP0205AE/9322CV (3 of 5)
11