Milnor MilTouch MWB26Z, Руководство оператора

Страница: 21 / 38

Pellerin Milnor Corporation
19
3.10.1.2 To Start a Local Wash Formula with Liquor Ratio Control
BNCLJO14.T01 0000265582 E.3 A.6 F.5 4/12/21 1:48 PM Released
Use the following instructions to run local wash formulas with Liquor Ratio Control if your ma-
chine is not equipped with the optional weighing system, or if an error prevents the use of your
weighing system.
1. On the Home display, select the formula for your goods type that your chemical supplier or
laundry specialist set to use Liquor Ratio Control.
2. Touch . The Load Weight window appears, as shown in the following figure.
Figure 9. Load Weight Window
Legend
A... The formula that will be used
to wash the goods
B... The customer (commercial
laundry) or department (insti-
tutional laundry) the batch
(goods) belongs to.
C... The weight of goods in the
machine, divided into pockets.
Weight 2 and Weight 3 are on-
ly used on divided-cylinder
machines.
D... Start the formula
E... Close the window and return
to the Home display
3. Enter the customer code.
a. Touch the value labelled “Customer.”
b. Use the keypad to enter a customer code number.
4. Enter the actual weight of the goods in the cylinder. A machine can have up to 3 pockets.
a. Touch the value labelled “Weight 1.”
b. Use the keypad to enter the weight of the goods. If you have a divided-cylinder machine,
enter the weight of the goods in pocket 1.
NOTE:
Ensure that you measure and enter the actual weight of goods in the
same unit (pounds or kilograms) as the configured machine capacity.
c. If your machine has more than one pocket, touch the values labelled “Weight 2” and
“Weight 3” to enter the weight of the goods in pocket 2 and pocket 3, respectively.
5. Touch to save all the data entered in the window and start the formula.
Normal Operation