Milnor 60044SR2, Руководство оператора, Страница: 29 / 48

22
Pellerin Milnor Corporation
2. Open the outer door.
3. Open the inner door.
4. In the
Weighing System
window, touch the button labeled “Compartment 2” to activate the
load cell (scale) in the second pocket.
The scale tares to zero and the weight value turns green.
5. Load the second pocket according to the recommended load size for your goods type. The
load cell weighs the goods as you load the pocket, and the controller displays the current
weight.
TIP:
Put approximately the same weight of goods in each pocket.
6. When you finish loading the second pocket, touch the button labeled “Compartment 2” again
to confirm the weight.
The weight value turns red, and the weight can no longer be adjusted.
7. Close the inner door.
8. Close the outer door.
9. If your machine is a three-pocket machine, repeat steps 1–8 to load the third pocket.
NOTICE:
You must load every pocket on your machine.
Continue to Section 3.11 : Start the wash formula., page 23 .
3.10.2 To Load the Pocket(s) with a Separate Laundry Scale
BNWVUO05.T03 0000306859 D.2 C.2 B.4 10/15/20 4:49 PM Released
Use the following instructions to load the remaining pocket or pockets if your machine is not
equipped with the optional weighing system (load cells). If your machine is equipped with the op-
tional weighing system (load cells), see
Section 3.10.1 , page 21 .
CAUTION: Ensure the inner and outer doors are fully closed before you attempt to ro-
tate the cylinder.
1. Align the second pocket with the outer door as described in Section 3.4 : Align the cylinder
pockets., page 15 .
2. Open the outer door.
3. Open the inner door.
4. Load the second pocket.
Normal Operation