Milnor 48040F7B, Руководство пользователя, Страница: 29 / 137

Chapter 3. Routine Maintenance
PELLERIN MILNOR CORPORATION
Table 4: Fluid Containers
Examine. Add fluid if necessary and keep components clean to prevent damage.
Mark
1 2 3 4 5 6
Do this each Component
More Data. See also Section 3.1.4
“Lubricant Identification and Procedures”
x day* See Figure 25 and Supplement 6 . Examine
the oil level and temperature. Add oil 68
(
Table 10 ) if necessary. If the temperature is
higher than 130° F (54° C) or the oil is
contaminated, maintenance can be necessary
Speak to your dealer or Milnor.
x 600 hours See Supplement 7 . Examine the oil for
contamination. Remove the used oil from the
tank and add oil 68 (
Table 10 ) if necessary.
x 2400 hours
hydraulic tank
Remove used oil from the tank. Add oil 68
(
Table 10 ).
x 200 hours Disk brake reservoir See Figure 24 . Examine the oil level and
quality. Add oil Dot3 ( Table 10 ) if necessary.
If the oil is contaminated, it is necessary to
bleed the brake system. Speak to your dealer
or Milnor. This is not routine maintenance.
Table 5: Components that Become Worn
Examine. Tighten or replace if necessary, to prevent shutdowns and unsatisfactory performance.
Speak to your dealer for replacement parts
Mark
1 2 3 4 5 6
Do this each Component More Data
x 200 hours drive belts and pulleys See Supplement 1 and Figure 8
x 200 hours tubes and hoses Examine hoses and hose connections for
leaks.
x 1200 hours door bumpers See Figure 21
x 200 hours rubber springs See Figure 22
x 200 hours shock absorbers See Supplement 4 and Figure 22
25