A
B
C
Millivac Maxi Pump User Guide
5
Install the Battery
1. Insert a coin into the slot in the back of the digital vacuum gauge
and remove the cover.
2. Install the battery (type CR2430) between the metal prongs, with the
“+” side facing out. Replace the cover.
Attach the Digital Vacuum Gauge
1. Remove the plastic cap from the threaded connector on the pump
head.
2. Reveal the corresponding digital vacuum gauge connector and O-
ring by sliding the nut toward the body of the gauge.
3. Align the connectors and then slide the nut onto the threads of the
pump head connector and hand tighten by turning the nut clockwise.
4. Tighten nut securely using a 3/4” or 19 mm wrench.
Attach the Tubing
1. Attach the supplied tubing to the pump by pressing it onto the
vacuum port on the digital vacuum gauge.
2. Insert the Millex-FG
50
filter device into other end of the tubing.
3. Connect tubing from appropriate filtration device onto the free out-
let of the Millex-FG
50
device.
Connect the Power Cord
The Millivac Maxi pump is shipped with three different power cords.
Connect the appropriate power cord to the pump’s electrical pigtail
and then plug into an electrical outlet.
A— For use in UK
B — For use in Switzerland
C — For use in EU
