18
10. System Specifications
Materials of Construction
Housing
Stainless steel 316 L
Key pad
Polyester
Screen window
Polyester with coating
Drying valve o-ring
Viton
®
elastomer
Liquid pump housing
Polypropylene
Liquid pump membrane
PTFE
Liquid pump valve
Viton elastomer
Pump head
Stainless steel 316 L with local Teflon
®
coating
Fluidic connections
Polyamide
Fluidic tubing
Silicone
Pump head cover
Polyacetal
Seal (O-ring between pump and pump head)
EPDM
Bottom plate seal
Silicone
Dimensions
Single
3 head system
Width
170 mm
585 mm
Depth
265 mm
265 mm
Height without head
162 mm
167 mm
Height with head
170 mm
175 mm
Weight without head
4.4 kg
14.3 kg
Weight with head
5.2 kg
16.8 kg
Electrical
Power supply input
100–240 V — 50–60 Hz — 1.8 A
Power supply output
24 V VDC—3.0 A
Pump input
24 VDC
Pump power
25 VA
Electrical Hub
24 VDC/75 VA
Vacuum
≥ 0.4 bar (11.8 inches of Hg)
Flow rate
7 to 16 seconds for 100 mL of Milli-Q
®
grade sterile water filtered through a Milliflex
®
MXHAWG124 funnel
TimeAccuracy
± 2 seconds in 5 minutes
OperationalRequirements
Temperature
10 °C to 40 °C (50 °F to 104 °F)
Relative humidity
See chapter 3—Operator and Equipment Safety
Altitude
< 2,000 Meters (6,561 feet)
Pollution degree
II
Main supply voltage
± 10% of the nominal voltage
Transient over voltages
Over voltage category II
Regulatory Information
Millipore SAS certifies that the VHP Resistant Milliflex
®
PLUS pump is designed and
manufactured in application of:
2014/30/EU Relating to electromagnetic compatibility
2014/35/EU Relating to electrical equipment designed for use within certain voltage
2011/65/EU Relating to the restriction of the use of certain hazardous substances (ROHS) in
electrical and electronic equipment