Milli-Q Direct 16, Руководство пользователя

Страница: 55 / 116

Milli-Q® Direct 8/16 System 55
Description,
Continued
Setup
Diagram 1 Diagram 2
Item Description
Install Date Change the installation date.
Buzzer Change the setting for the Buzzer.
MQ Recirc Mode Change the amount of time that the System
automatically recirculates every hour in READY
Mode.
NOTE
If set to 60 minutes, the daily TOC Curve Check
will not be performed.
POD Flow Stop Change the amount of time that the POD Unit
dispenses continuously before it automatically
stops.
Temp Comp Mode Change the Temperature Compensation Mode.
Flow Calibration Used for performing a flow calibration.
UV 254 nm Activation Used to activate or deactivate the UV 254 nm
Lamp.
UV 185 nm Activation Used to activate or deactivate the UV 185 nm
Lamp.
ASM UV Lamp Schedule •
Used to change the times when the ASM
(Automatic Sanitisation Module) turns on.
•
See the ASM User Manual for more
information.
Network Settings •
Change Network settings.
•
Contact Millipore SAS for more information.
TOC Curve Check Time Change the time when a TOC Curve Check is
automatically performed each day.
Continued on next page