Miller XR-S Control, Руководство пользователя

Страница: 16 / 40

OM-245777 Page 12
SECTION 4 − SPCIFICATIONS
4-1. Serial Number And Rating Label Location
The serial number and rating information for this product is located on the rear panel. Use rating label to determine input power requirements and/or
rated output. For future reference, write serial number in space provided on back cover of this manual.
4-2. Unit Specifications
Type of Input
Power
Welding Power
Source Type
Wire Feed
Speed
Wire Diameter
Range
Welding
Circuit Rating
Overall
Dimensions
Weight
24 Volts AC
Single-Phase
2.5 Amperes
50/60 Hertz
Constant Voltage (CV)
DC For GMAW Or
Constant Voltage(CV) /
Constant Current (CC) DC
For GMAW-P
All Need 14-Pin And
Contactor Control
50 To 900 ipm **
(1.3 To 22.9 mpm)
0.030 To .062 in.
(0.8 To 1.6 mm)
Max Spool
Capacity:
12 in. (305 mm)
Max Weight of
Filler Wire:
45 lb (20.4 kg)
400 A
100% Duty Cycle *
Length: 21-1/4 in.
(540 mm)
Width: 9-1/2 in.
(241 mm)
Height: 16 in.
(406 mm)
42.5 lb
(19.2 kg)
* System Duty Cycle is Limited to Gun Rating
** See Section 4-3 for Detailed Wire Type, Size and Rated Speed Range
4-3. Wire Type, Size and Feed Speed Table
Motor Speed Wire Type Wire Size Rated Speed Range
*
Standard Aluminum
0.035 To .062 in.
(0.9 To 1.6 mm)
70 To 860 ipm
(1.8 To 21.8 mpm)
Standard Other
0.035 To .045 in.
(0.9 To 1.2 mm)
70 To 860 ipm
(1.8 To 21.8 mpm)
* Rated Speed Range Per IEC 60974-5
4-4. Environmental Specifications
A. IP Rating
IP Rating Operating Temperature Range Storage Temperature Range
IP23S
This equipment is designed for outdoor use. It
may be stored, but is not intended to be used
for welding outside during precipitation unless
sheltered.
14 to 104

F ( − 10 to 40

C)
− 4 to 131

F ( − 20 to 55

C)
IP23S 2014 − 06
B. Information On Electromagnetic Compatibility (EMC)
!
This Class A equipment is not intended for use in residential locations where the electrical power is provided by the public low −
voltage supply system. There can be potential difficulties in ensuring electromagnetic compatibility in those locations, due to con-
ducted as well as radiated disturbances.
ce-emc 3 2014-07