Miller XMT 450 CC, Техническое руководство, Страница: 11 / 84

TM-257 220 Page 7
XMT 450 CC/CV
3-5. Dimensions and Weight
Hole Layout Dimensions
C
D
A
G
14.5 in.
(368 mm)
26.8 in.
(681 mm)
17.2 in.
(437 mm)
B
Ref. 252 018-A
F
E
A 8-11/16 in. (221 mm)
B 11-3/8 in. (289 mm)
C 15-3/4 in. (400 mm)
D 22-7/16 in. (570 mm)
E 2-3/4 in. (70 mm)
F 3-3/8 in. (86 mm) Dia.
G 1/4-20 UNC 2B Thread
Weight
122 lb (55.3 kg)
3-6. Environmental Specifications
A. IP Rating
IP Rating
IP23
This equipment is designed for outdoor use. It may be stored, but is not intended to be used
for welding outside during precipitation unless sheltered.
IP23 2014−06
B. Information On Electromagnetic Fields (EMF)
!
This equipment shall not be used by the general public as the EMF limits for the general public might be exceeded during welding.
This equipment is built in accordance with EN 60974−1 and is intended to be used only in an occupational environment (where the general public
access is prohibited or regulated in such a way as to be similar to occupational use) by an expert or an instructed person.
Wire feeders and ancillary equipment (such as torches, liquid cooling systems and arc striking and stabilizing devices) as part of the welding
circuit may not be a major contributor to the EMF. See the Owner’s Manuals for all components of the welding circuit for additional EMF exposure
information.
S
The EMF assessment on this equipment was conducted at 0.5 meter.
S
At a distance of 1 meter the EMF exposure values were less than 20% of the permissible values.
ce-emf 1 2010-10
C. Information On Electromagnetic Compatibility (EMC)
!
This Class A equipment is not intended for use in residential locations where the electrical power is provided by the public low−
voltage supply system. There can be potential difficulties in ensuring electromagnetic compatibility in those locations, due to con-
ducted as well as radiated disturbances.
This equipment complies with IEC61000-3-11 and IEC 61000−3−12 and can be connected to public low-voltage systems provided that the public
low-voltage system impedance Z
max
at the point of common coupling is less than 73.66 m
W
(or the short−circuit power S
sc
is greater than
2,172,158 VA). It is the responsibility of the installer or user of the equipment to ensure, by consultation with the distribution network operator if
necessary, that the system impedance complies with the impedance restrictions.
ce-emc 1 2014-07