Miller VL-M4, Руководство пользователя, Страница: 15 / 36

OM-189 530 Page 11
SECTION 3 – SPECIFICATIONS
3-1. Weld Control
Specification Description
Type Of Input Power From Welding
Power Source Single-Phase 115 Volts AC, 10 Amperes, 50/60 Hertz
Welding Power Source Type Constant Current (CC), Constant Voltage (CV), AC Or DC, With Contactor And Remote Capabilities
Welding Processes Gas Metal Arc (GMAW) And Submerged Arc Welding (SAW)
Overall Dimensions Including Knobs,
Receptacles, Etc. Weld Control — Length: 11.5 in (292 mm); Width: 11.25 in (286 mm); Height: 7 in (178 mm)
Shunt Control — Length: 14 in (356 mm); Width: 8.75 in (222 mm); Height: 4 in (102 mm)
Weight Weld Control — Net: 18 lb (8.2 kg)
Shunt Control — Net: 10.2 lb (4.6 kg)
Weld Voltage And Amperage
Capacity (AC Or DC) 0 To 100 Volts
0 To 1500 Amperes
3-2. Description
This weld control is designed to au-
tomatically cycle welding events
while maintaining constant wire
feed speed. This unit can be used
with constant current, constant
voltage, AC or DC welding power
sources having remote contactor
control and output control capabili-
ties for Submerged Arc Welding
(SAW). Normally open relay con-
tacts that work in conjunction with
the weld cycle are available to in-
terface with other equipment (such
as fixtures and flux valves). See
Section 4-6 and 4-7 for connection
information on TE1.
For information on the wire drive
assembly, see Owner’s Manual
supplied with the assembly. A cur-
rent sensing shunt control is also
provided with the weld control.
802 530