Miller OM-280995C, Руководство пользователя

Страница: 6 / 20

OM-280995 Page 4
SECTION 2 − SPECIFICATIONS
Applications Arc Welding, Plasma Cutting, Oxy-Fuel Welding And Cutting
Viewing Field 124 x 30 mm
Operating Modes Three: Weld, Cut, X-Mode
Reaction Time 0.00004 sec (1/25,000)
Available Shades
All Shades Provide
Continuous UV And IR
Protection.
Cut: 5 − 8
Weld: 9 − 13
Light State: No. 3 (Passive Mode)
!
Goggles Can Be Used For Grinding In Light State
(Passive Mode) Only When Used With Customer-Sup-
plied Face Shield.
Inside Lens Meets Eye Protection Requirements Of ANSI Standard Z87.1
Sensitivity Control Five Sensitivity Levels From Low To High
Delay Control Seven Delay Control Levels From Short (1) To Long (7)
Automatic Power None
Shuts Lens Off 30 Minutes After Last Arc Is Struck.
Low Battery Light Red LED Illuminates To Indicate Five Hours Of
Battery Life Remains
Power Supply One CR2450 Lithium Battery
Approximate Run Time Of 1000 Hours
Sensors Two
Operating Temperature 23 F to 131 F / − 5 C to +55 C
When Stored In Extremely Cold Temperatures, Warm Weld-Mask
To Ambient Temperature Before Welding.
Storage Temperature − 4 F to 158 F / − 20 C to +70 C
When Stored In Extremely Cold Temperatures, Warm Weld-Mask
To Ambient Temperature Before Welding.
Total Weight 11.8 oz (334 g) (not including head shroud)
Standards Meets ANSI Z87.1 (2015) and CSA Z94.3 Standards
Warranty Two Years From Date Of Purchase (See Section 12)