Miller Maxstar 161 S, Руководство пользователя

Страница: 29 / 44

A complete Parts List is available at www.MillerWelds.com
OM-275099 Page 25
6-7. Accessing Control Panel Menu: Lift-Arc TIG (STH And STL Models Only)
1 Menu Button
While in the Lift-Arc process, press
and hold Menu button for approxim-
ately two seconds to access Ma-
chine Configuration menus. Use
Menu button to cycle through pa-
rameters that can be set.
2 Parameter Display
3 Encoder
Rotate Encoder to adjust parame-
ter setting.
3
1
2
USER
REMOTE STD
OFF
PPS
Trigger Mode Selection:
[REMOTE STD] Remote Standard
Typically used with a remote foot or hand control. REMOTE STD requires
a maintained contact closure to enable weld output. Amperage can be con-
trolled with a remote potentiometer, or it can be set at the control panel.
[OUTPUT ON] Output on (Lift only)
[PPS] Pulse Control: (STH Model Only)
Reduces heat input to minimize distortion and increase travel speed. Set
PPS (pulse per second). The range is OFF−150 PPS. Background Am-
perage and Peak Amperage are not adjustable. Background Amperage
equals 25% of Peak Amperage. Peak Amperage Time equals 40%.