Miller FieldPro Smart Feeder CE, Руководство пользователя

Страница: 20 / 56

OM-264234 Page 14
5-2. Equipment Connection Diagram
3
5
6
10
2
8
9
1
4
7
! Turn Off wire feeder and welding
power source.
1 Welding Power Source
2 Gas Hose
3 Weld Cable To Feeder
4 Work Cable To Feeder
5 Workpiece
6 Work Clamp
Connect work clamp to workpiece.
7
Gun
8 Gun Trigger Receptacle
9 Wire Feeder
10 Gas Cylinder
Use of shielding gas is dependant on wire
type.
Shielding gas pressure not to exceed
100 psi (689 kPa).
262 419-A
5-3. WCC (Weld Cable Control) Applications
The FieldPro t Smart Feeder must be used with a PipeWorx 350 FieldPro t power source connected to three phase input power.
5-4. Associating Wire Feeder To PipeWorx 350 FieldPro
1 Connect feeder to PipeWorx 350 FieldPro .
2 Do not strike an arc.
3 Feeder will display dashed lines until connected.
4 The voltmeter will show preset voltage and wire speed while idle or weld amperage and voltage at the wire feeder while welding.
5 Use voltage control on feeder to adjust weld voltage.
See Section 5-5 for detailed equipment setup.