Miller C-30, Руководство пользователя

Страница: 9 / 20

OM-199 706 Page 5
Ref. 802 661
Turn off welding power source/wire
feeder. Cut off wire at contact tip.
1 Nozzle
2 Contact Tip
3 Diffuser
.
Correct wire size is stamped on
tip. Be sure to use indicated
wire size.
Tools Needed:
1
2
3-2. Replacing The Contact Tip
3
802 648-A
Turn off welding power source/wire feeder.
Tools Needed:
3-3. Installing Or Replacing The Liner
1 Liner
2 Feeder Connector
3 Nozzle
4 Contact Tip
5 Diffuser
6 Fiber Washer
7 Insulator
Lay gun cable out straight. Remove
washer, nozzle, tip, diffuser and in-
sulator. Remove existing liner from
adapter by unscrewing threaded
end of liner and removing liner from
gun cable.
Insert new liner into feeder connec-
tor and feed liner into connector.
Rotate threaded end of liner into
adapter to secure liner in place.
At opposite end of gun cable, cut lin-
er so 7/8 in extends beyond end of
gooseneck as shown. Reinstall in-
sulator, washer, diffuser, tip and
nozzle.
3
4
5
7
1
1
2
6
Threaded End