Miller Air Pak Скачать руководство пользователя страница 85

Warranty Questions?

Call
1-800-4-A-MILLER
for your local
Miller distributor.

miller_warr 7/99

Your distributor also gives

you ...

Service

You always get the fast,

reliable response you

need. Most replacement

parts can be in your

hands in 24 hours.

Support

Need fast answers to the

tough welding questions?

Contact your distributor.

The expertise of the

distributor and Miller is

there to help you, every

step of the way.

Effective January 1, 1999

(Equipment with a serial number preface of KK" or newer)

This limited warranty supersedes all previous Miller warranties and is exclusive with no other

guarantees or warranties expressed or implied.

LIMITED WARRANTY 

 Subject to the terms and conditions

below, Miller Electric Mfg. Co., Appleton, Wisconsin, warrants

to its original retail purchaser that new Miller equipment sold

after the effective date of this limited warranty is free of defects

in material and workmanship at the time it is shipped by Miller.

THIS WARRANTY IS EXPRESSLY IN LIEU OF ALL OTHER

WARRANTIES, EXPRESS OR IMPLIED, INCLUDING THE

WARRANTIES OF MERCHANTABILITY AND FITNESS.
Within the warranty periods listed below, Miller will repair or

replace any warranted parts or components that fail due to

such defects in material or workmanship. Miller must be

notified in writing within thirty (30) days of such defect or

failure, at which time Miller will provide instructions on the

warranty claim procedures to be followed.
Miller shall honor warranty claims on warranted equipment

listed below in the event of such a failure within the warranty

time periods. All warranty time periods start on the date that

the equipment was delivered to the original retail purchaser, or

one year after the equipment is sent to a North American

distributor or eighteen months after the equipment is sent to an

International distributor.

1.

5 Years Parts 

 3 Years Labor

* Original main power rectifiers
* Inverters (input and output rectifiers only)

2.

3 Years — Parts and Labor

* Transformer/Rectifier Power Sources
* Plasma Arc Cutting Power Sources
* Semi-Automatic and Automatic Wire Feeders
* Inverter Power Supplies
* Intellitig
* Engine Driven Welding Generators

(NOTE: Engines are warranted separately by

the engine manufacturer.)

3.

1 Year — Parts and Labor

* Motor Driven Guns (w/exception of Spoolmate

185)

* Process Controllers
* Positioners and Controllers
* Automatic Motion Devices
* Robots
* RFCS Foot Controls
* IHPS Power Sources
* Water Coolant Systems
* HF Units
* Grids
* Maxstar 140
* Spot Welders
* Load Banks
* SDX Transformers
* Miller Cyclomatic Equipment
* Running Gear/Trailers
* Plasma Cutting Torches (except APT, ZIPCUT &

PLAZCUT Models)

* Field Options

(NOTE: Field options are covered under True

Blue

 

for the remaining warranty period of the

product they are installed in, or for a minimum of

one year — whichever is greater.)

4.

6 Months — Batteries

5.

90 Days — Parts

* MIG Guns/TIG Torches

* APT, ZIPCUT & PLAZCUT Model Plasma Cutting

Torches

* Remote Controls
* Accessory Kits
* Replacement Parts (No labor)
* Spoolmate 185

Miller’s True Blue

 Limited Warranty shall not apply to:

1.

Items furnished by Miller, but manufactured by others,

such as engines or trade accessories. These items are

covered by the manufacturer’s warranty, if any.

2.

Consumable components; such as contact tips, cutting

nozzles, contactors, brushes, slip rings, relays or parts

that fail due to normal wear.

3.

Equipment that has been modified by any party other

than Miller, or equipment that has been improperly

installed, improperly operated or misused based upon

industry standards, or equipment which has not had

reasonable and necessary maintenance, or equipment

which has been used for operation outside of the

specifications for the equipment.

MILLER PRODUCTS ARE INTENDED FOR PURCHASE

AND USE BY COMMERCIAL/INDUSTRIAL USERS AND

PERSONS TRAINED AND EXPERIENCED IN THE USE

AND MAINTENANCE OF WELDING EQUIPMENT.

In the event of a warranty claim covered by this warranty, the

exclusive remedies shall be, at Miller’s option: (1) repair; or (2)

replacement; or, where authorized in writing by Miller in

appropriate cases, (3) the reasonable cost of repair or

replacement at an authorized Miller service station; or (4)

payment of or credit for the purchase price (less reasonable

depreciation based upon actual use) upon return of the goods

at customer’s risk and expense. Miller’s option of repair or

replacement will be F.O.B., Factory at Appleton, Wisconsin, or

F.O.B. at a Miller authorized service facility as determined by

Miller. Therefore no compensation or reimbursement for

transportation costs of any kind will be allowed.

TO THE EXTENT PERMITTED BY LAW, THE REMEDIES

PROVIDED HEREIN ARE THE SOLE AND EXCLUSIVE

REMEDIES. IN NO EVENT SHALL MILLER BE LIABLE FOR

DIRECT, INDIRECT, SPECIAL, INCIDENTAL OR

CONSEQUENTIAL DAMAGES (INCLUDING LOSS OF

PROFIT), WHETHER BASED ON CONTRACT, TORT OR

ANY OTHER LEGAL THEORY.

ANY EXPRESS WARRANTY NOT PROVIDED HEREIN

AND ANY IMPLIED WARRANTY, GUARANTY OR

REPRESENTATION AS TO PERFORMANCE, AND ANY

REMEDY FOR BREACH OF CONTRACT TORT OR ANY

OTHER LEGAL THEORY WHICH, BUT FOR THIS

PROVISION, MIGHT ARISE BY IMPLICATION,

OPERATION OF LAW, CUSTOM OF TRADE OR COURSE

OF DEALING, INCLUDING ANY IMPLIED WARRANTY OF

MERCHANTABILITY OR FITNESS FOR PARTICULAR

PURPOSE, WITH RESPECT TO ANY AND ALL

EQUIPMENT FURNISHED BY MILLER IS EXCLUDED AND

DISCLAIMED BY MILLER.

Some states in the U.S.A. do not allow limitations of how long

an implied warranty lasts, or the exclusion of incidental,

indirect, special or consequential damages, so the above

limitation or exclusion may not apply to you. This warranty

provides specific legal rights, and other rights may be

available, but may vary from state to state.

In Canada, legislation in some provinces provides for certain

additional warranties or remedies other than as stated herein,

and to the extent that they may not be waived, the limitations

and exclusions set out above may not apply. This Limited

Warranty provides specific legal rights, and other rights may

be available, but may vary from province to province.

Содержание Air Pak























































































Отзывы: