Miller AG-BAG MX1012, Руководство оператора

Страница: 108 / 156

102
190
190
251
611
611
611
611
Lamp
Color Reason For Fault Effect (Only When Fault
Code Is Active) Course Of Action
Engine crankshaft speed/
position - data erratic,
intermittent or incorrect.
Engine speed/position
sensor (crankshaft) - data
erratic, intermittent or
incorrect.
Real - time clock power
interrupt - data erratic,
intermittent or incorrect.
Sensor supply 3 circuit -
voltage below normal or
shorted to low source.
Turbocharger compressor
outlet temperature - data
above normal.
Fuel inlet meter device
- data valid but above
normal operating range -
moderately severe level.
Fuel inlet meter device
flow demand lower than
expected - data valid but
below normal operating
range - moderately severe
level. Call Cummins service.
Call Cummins service.
Call Cummins service.
Call Cummins service.
Check for air leaks between air
cleaner and turbocharger. Call
Cummins service.
Check for fuel inlet restriction.
Check for air in fuel supply line.
Check for plugged fuel filter.
Call cummins service.
Check for air in fuel supply line.
Check fuel return line restriction.
Call Cummins service. Engine can run rough.
Possible poor starting.
Engine runs using backup
speed sensor. Engine
power is reduced.
Engine may misfire. En-
gine power is reduced.
None on performance.
Data in the ECM will not
have accurate time and
date information.
Possible hard starting and
rough running.
Fueling to the engine is
limited.
Possible smoke, loss of
power or hard starting.
Engine power is derated.
None or possible engine
noise associated with
higher injection pressures
especially at idle or light
load. Engine power is
reduced.
Cummins F
ault
Code # Engine Displa
y
SPN # Engine Displa
y
FMI #
2
2
2
4
15
16
18
689
2321
319
238
2347
2292
2293
Amber
None
Amber
Amber
Amber
Amber
Amber