Miller 1078 Arrow fx 3 Скачать руководство пользователя страница 14

Страница: 14 / 16

Storage

The Arrow

fluid head can be stored for extended periods; Miller

recommends storage in a Miller soft case and the following:

•  Remove battery.
•  Clean the external surfaces.
•  Keep in a dry place away from direct sunlight.

• Loosen off PAN & TILT LOCK.

Spare Parts and Accessories

ITEM

ITEM NO.

Battery

P3798

Offset camera plate with 2 x 3/8” screws

858

Camera plate (Euro) with 1/4” & 3/8” screws

860

Camera screw 3/8”

P0037

Camera screw 1/4”

P0036

Additional pan handle - telescopic with clamp

696

Accessory mounting block

1260

Mitchell base adaptor with clamp

1225

D150 Claw ball level

1295

Please refer to warranty card for complete details.

Miller Authorised Service Agents must carry out all service

and repair work. Failure to observe this requirement may void

warranty. It is advisable to notify Miller or a Miller authorised.

service agent if a change of performance is observed as a

result of dropping or rough usage. For information regarding

sales and service of Miller products or for your nearest Miller

representative please contact us via our website or at the
following:

MILLER CAMERA SUPPORT EQUIPMENT

30 Hotham Parade
Artarmon, Sydney, NSW, 2064, Australia

P +61 2 9439 6377
F +61 2 9438 2819

[email protected]

MILLER CAMERA SUPPORT (LLC) USA

216 Little Falls Road (Unit 15 & 16),
Cedar Grove, New Jersey, 07009, USA

P +1 (973) 857 8300
F +1 (973) 857 8188

[email protected]

MILLER FLUID HEADS (EUROPE) LTD.

12A Shepperton Business Park, Govett Avenue
Shepperton, Middlesex, TW17 8BA, United Kingdom

P +44 (0) 1932 222 888
F +44 (0) 1932 222 211

[email protected]

millertripods.com

Service, Sales and Support

Содержание 1078 Arrow fx 3

















Результаты поиска

Содержание 1078 Arrow fx 3

Отзывы:

Похожие инструкции для 1078 Arrow fx 3

Бренды по названию

Популярные бренды

Miller 1078 Arrow fx 3, Руководство оператора

Результаты поиска

Содержание 1078 Arrow fx 3

Отзывы:

Похожие инструкции для 1078 Arrow fx 3

Бренды по названию

Популярные бренды