Miller Weldmaster Triad Extreme, Руководство пользователя

Страница: 4 / 50

Instruction Manual
Page 4
1.0 Introduction
The Triad Extreme Seam hot wedge welding machine is designed for in house fabrication of a wide
range of flexible membranes. This includes, but is not limited to, PVC, PP, PE, LDPE, Urethane, etc.
Thickness of material that can be welded will vary also with product. Normal range is 5-100 mil thick-
ness and can be supported or non-supported material.
The Triad comes complete with three different guides. This will allow you to perform the overlap weld,
hem weld, prayer weld and many more welding options.
The Triad uses a hot wedge as its heat source. This method will give you smokeless and quiet opera-
tion. The wedge also allows for welding thinner products without distortion.
The Triad can be used as a stationary welder or in an automatic mode. When using the Triad in an
automatic mode, a track system is suggested. Please refer to Track System Specifications.
We suggest that you make samples welds of your product to achieve the correct settings for heat,
speed and wedge alignment before you start welding
CHAPTER 1 INTRODUCTION