Miller Electric Si 160, Руководство пользователя

Страница: 17 / 44

OM-250 147 Page 13
SECTION 4 − OPERATION
Weld output terminals are energized
when power is On and Ready Light
(LED) is lit.
1 Ready Light (LED)
Light comes on approximately two seconds af-
ter power switch is placed in On (I) position if
Stick has been selected. The light indicates
that the unit is energized and ready for welding.
2
High Temperature Light (LED)
Light comes on if unit overheats. Welding can
resume when unit has cooled (see Section
3-6).
3
Amperage Adjustment Control
See Section 4-2.
4
Positive Weld Output Receptacle
For Stick welding, connect electrode cable to
this receptacle.
5 Negative Weld Output Receptacle
For Stick welding, connect work cable to this
receptacle.
6 Power Switch
Place switch in On (I) position to turn unit on.
Place switch in Off (0) position to turn unit off.
4-1. Controls For Si 160
956142809_3-6_D
4
1
2
3
5
6
4-2. Amperage Adjustment Control
1 Amperage Adjustment Control
Rotate knob clockwise to increase
amperage (Min − Max).
1