OM-823 Page 4
4.
Routine Maintenance
!
Turn Off all power before maintaining.
3 Months
Everyday
Replace
Cracked
Parts
Replace
Unreadable
Labels
Cord(s)
Move Control From
Min. To Max.
5.
Troubleshooting
Trouble
Remedy
No amperage or voltage control.
Set switches and controls on welding power source or generator (see Section 3*).
Check weld output on welding power source or generator.
Secure cord connections or replace cords, if necessary.
No output (contactor) control.
Remote Hand Control switch in wrong position or control not so equipped.
Check switch settings and weld output on welding power source or generator.
Secure cord connections or replace cords, if necessary.
*See welding power source or generator Owner’s Manual.
6.
Circuit Diagrams
150 670-C
RHC-3
094 231-B
RHC-3-GD34A
053 656-A
RHC-14
RHC-3 (100 ft)
210 458-B
