Miller Electric PowCon Arc Stud 625, Руководство пользователя

Страница: 16 / 48

OM-216 244 Page 12
4-3. Weld Output Receptacles And Selecting Cable Sizes
Y ARC WELDING can cause Electromagnetic Interference.
To reduce possible interference, keep weld cables as short as possible, close together, and down low, such as on the floor.
Locate welding operation 100 meters from any sensitive electronic equipment. Be sure this welding machine is installed
and grounded according to this manual. If interference still occurs, the user must take extra measures such as moving
the welding machine, using shielded cables, using line filters, or shielding the work area.
400 350 300 250 200 150 100 50
300
400
500
600
700
800
900
1000
1100
1200
1300
1400
1500
1600
1700
1800
1900
2100
2/0
4/0
2-4/0
Use multiple 4/0 cables or
500 mcm cable or larger.
No. 1
Cable Size
Area
1/4”
5/16”
3/8”
7/16”
1/2”
5/8”
3/4”
7/8”
1”
Arc
Stud Size & W
elding Current (Shank Size)
TOTAL CABLE LENGTH (FT)
(Ground And Electrode )
Output Receptacles
Weld Output
Terminals
Y Turn off power before connecting to
weld output terminals.
Y Do not use worn, damaged, undersized,
or poorly spliced cables.
(Work)
(Gun)
*
This chart is a general guideline and may not suit all applications. If cable overheating occurs (normally you can smell it), use next size larger
cable.