Millennium T-360, Инструкция по эксплуатации

Страница: 9 / 18

4282019
9
Figure 18
Install Seat Receiver
STEP 2: Install the seat receiver hub and platform braces at the same time using four (4) ¼” x 3” bolts and four (4) ¼” x 2” bolts, sixteen
(16) washers and eight (8) nuts. Place washers under the head of bolts and under the nuts. Note the 3” bolts go thru the hub, platform
and platform braces as shown in Figure 18. You can now tighten all the bolts you have installed thus far.
Figure 19
Assemble Three Ladder Sections
STEP 3: Assemble the three ladder sections together using one (1) leg connector angle and one (1) leg connector angle with brace
attachment. Use four (4) 5/16 x 2-1/2” bolts, eight (8) washers and four (4) nuts for each attachment. Place washers under the head of
bolts and the nuts. Note that the connector with the brace attachment will point toward the inside of the ladder. After all bolts are installed
snug all the nuts then go back and tighten them all as shown in Figure 19.
Figure 20
Assemble Two Legs
STEP 4: Assemble the other two (2) legs in the same manor as you did the ladder, snugging the nuts and then go back and tighten them
all. One leg will be shorter to facilitate the adjustable foot as shown in Figure 20.